RDSS freezes when selecting tracks for download

[Dallas4lr]

Ted,


I just starting using RDSS again on a new computer with windows 7 installed after a long haitus. On the third day the program has started locking, actually prompting me that RDSSis not responding when I select or deselect a track in the Data centre for download. Nothing new has been installed and no viruses are present. I've uninstalled and reinstalled, I ve even restored my computer to an earlier date and reinstalled.


Please Help!!!
Carl

[Ted Craven]

Carl,

Welcome back!

Is it locking up when you click on:

a) a track in the All Tracks list
b) a track in the Selected Tracks list
c) a checkbox indicating a card for a specific track for a specific date



You say it happened after the 3rd day. Before the 3rd day, was there any problem doing what you now cannot do? Can you think of any change you made to Windows during that 3 day period?

Can you do the following:

1. before opening RDSS, take a copy of this file on the RDSS folder: tracklist.dat. Rename it tracklist_before.dat

2. Run RDSS to the point in the Datacentre when you get the problem you describe. If possible, wait for a while for the delay to finish. Whether the delay finishes and RDSS responds to what you clicked on, or the delay never finishes, or the software crashes - could you then go again to your RDSS folder and again take a copy of the file tracklist.dat and rename it tracklist_after.dat.

3. Email those 2 files (before and after) to me please.

Carl - is your Windows 7 32 bits or 64 bit version?


Has anyone else using Windows 7 experienced the same problem clicking on something in the Data Centre?

Ted

[Dallas4lr]

Thanks Ted,

I'm glad to be back


It is locking up when I click in:

a) a track in the All Tracks list


This is Windows 7 64bit. I will email the files asap. Initially I had some problems getting
the downloads to function, but I think that had more to do with my trackmaster subscription
activating. Once trackmaster became active everything functioned fine until today. The only thing
which occured was a windows update, but I resotred my computer before the update and I'm still
having the issue;

[Ted Craven]

Carl,

Have you tried doing a cold boot of your computer (Shut Down, count to 10 or go get a gin-tonic), then Start Up again and load RDSS first thing?

Does the problem persist? I'm wondering if there's ANY chance you have 2 instances of RDSS running at the same time. (That shouldn't be an issue, but I'm trying to isolate the problem).

If you check the box in the green (header) section of the All Tracks list to check ALL tracks - do you have the problem? If you then Uncheck ALL tracks do you have the problem?

This is not a known problem so far and the Datacentre has been rather unchanged for several years. I have not personally tested this on Windows 7 64 bit, but enough others have that I'm a bit stumped just at the moment.

Your files might help.

Ted

[Dallas4lr]

Originally Posted by Ted Craven

Carl,

Have you tried doing a cold boot of your computer (Shut Down, count to 10 or go get a gin-tonic), then Start Up again and load RDSS first thing?

Does the problem persist? I'm wondering if there's ANY chance you have 2 instances of RDSS running at the same time. (That shouldn't be an issue, but I'm trying to isolate the problem).

If you check the box in the green (header) section of the All Tracks list to check ALL tracks - do you have the problem? If you then Uncheck ALL tracks do you have the problem?

This is not a known problem so far and the Datacentre has been rather unchanged for several years. I have not personally tested this on Windows 7 64 bit, but enough others have that I'm a bit stumped just at the moment.

Your files might help.

Ted

Ted,

I attempted all of the above, results were the same program stopped responding and would infintely cycle. I have emailed you the tracklist files.



Thanks
Carl

[Ted Craven]

Carl,

Just to close out this issue - after you sent me your files, we determined that the problem was in a corrupt tracklist.dat file (the file which tracks the current Data Centre track/dates/cards settings). When I send you a new one, everything started to work fine. The issue was nothing to do with Windows 7 64 bit.

For anyone else who may encounter a similar problem, here is the file I sent (in a ZIP file):

tracklist.zip

Unzip the tracklist.dat file from the ZIP into the RDSS folder, overwriting the previous tracklist.dat file. Open RDSS and the Data Centre, add/remove tracks from the Selected Tracks List until you get it to look like you want.

Ted