|
Google Site Search | Get RDSS | Sartin Library | RDSS FAQs | Conduct | Register | Site FAQ | Members List | Today's Posts | Search |
Synergism A Forum for Synergism Users to discuss, exchange tips, post race workups. |
|
Thread Tools | Display Modes |
07-17-2012, 06:09 PM | #1 |
Grade 1
Join Date: Jun 2005
Location: Nanaimo, British Columbia, Canada
Posts: 8,854
|
SYN2 Export File Testing - Help!
Could I get some feedback from experienced Synergism 2 users please! (I'll deal with Syn3 and Syn4 later, OK?) Just SYN2 ONLY, this discussion.
Could I get 2 saved files from people for the following race, per data in the screen images below: Del Mar July 18, Race 1. File 1: name it ORIGINAL.RAC File 2: name it ADJUSTED.RAC 1. The race distance is 8.5 furlongs. 2. For both files, enter data only for the 5 horses in the upper section, and name them simply 1, 2, 4, 6, 8. 3. Remember - RDSS reports Call times in tenths of seconds, while SYN expects call times in fifths. So, for 1:12.7 2nd call time, enter 112.3 (which introduces a .10 second inaccuracy, but that's a different discussion ...). For File 1, enter RAW, unadjusted times from the 1st screen below (RDSS' Original screen). Enter the actual paceline distance I chose: for example, Horse 1's paceline distance is 6.5f. (We're not handicapping the race here, just getting common ground so I know what the file output should be). Please leave off APV and Class adjustments for now. Tell me what you think the Track Record should be, and also the requested setup 2nd Call and Final Time info. Please leave the Open Adjustment for each horse at 0 for now. Please DO NOT enter any shipper or track adjustment values, for now. After you have entered data for the 5 horses, please save the file as ORIGINAL. For File 2, enter Adjusted values from the 2nd screen below (RDSS' Adjusted screen). The distance of each paceline should be the same as today's distance: 8.5 furlongs (the call times have been projected to 8,5f, regardless of the original distance). Enter the 1st, 2nd and Final Call Times, and the corresponding Beaten lengths. Save the file as ADJUSTED. Then, please attach these two files (ORIGINAL.RAC and ADJUSTED.RAC) to an email and send it to me: ted@sartinmethodology.com. We can deal with the other adjustments such as APV and Class, shipper, open adjustments, etc, later. Thanks in advance for the assistance! Ted
__________________
RDSS - Racing Decision Support System™ |
07-18-2012, 10:55 AM | #2 |
Grade 1
Join Date: Oct 2005
Posts: 1,258
|
Synergism Files
Ted I just sent you the 2 test files you requested. With all the different distances the readouts for the adjusted pacelines make more sense to me.
I think most of the experienced Synergism users here probably would not mix sprint and route pacelines in a route race. As you said this is just to test the export from RDSS to Synergism and not trying to handicap this race. Regards------Mike "Houndog" |
07-18-2012, 06:17 PM | #3 |
Grade 1
Join Date: Jun 2005
Posts: 878
|
I have question:
what differences would arise in using raw or adjusted times. |
07-18-2012, 07:52 PM | #4 |
BetMix User
Join Date: Oct 2005
Posts: 2,433
|
Race Results and SYN 2 Screen Shots DMR R1 7-18-12
Here's how the race played out.
|
07-18-2012, 09:06 PM | #5 | |
Grade 1
Join Date: Jun 2005
Location: Nanaimo, British Columbia, Canada
Posts: 8,854
|
Quote:
Adjusted lines would all be projected/extracted to today's race distance (using RDSS' formulas for extracting sprints from routes, and projecting sprints to routes). At your option, Daily Track Variant and Inter Track Variant are also incorporated (or omitted). A surface adjustment is also applied. So, when the data hits Synergism, it's as if the lines were all at today's distance, all on today's surface, all from the same track and all run over the same relative track surface speed (i.e. the effect of normalizing DTV). You would simply choose to use RDSS variant set and adjustments (supplied by Trackmaster/Equibase), or do without them. I'm still trying to understand the effect of the 3 Year Best time component: whether we absolutely need the DRF figure, or whether some other 'par' figure as long as it is consistently applied, is just as functional. Certainly the user can enter a 3 year best figure in RDSS before export (which could be saved) - OR, if these are already saved in the Syner3.par file, RDSS can read that file and extract that time par adn send it in the SYN2 file export. SYN3 already requires that file (and it needs to be accurate, and updated for new track codes), so no reason not to make use of it for the SYN2 file export. My understanding so far ... Hope that helps. Ted
__________________
RDSS - Racing Decision Support System™ |
|
07-18-2012, 09:52 PM | #6 |
BetMix User
Join Date: Oct 2005
Posts: 2,433
|
Hi Ted,
I'm of the opinion and theoretically thinking, if RDSS converts a file to the same file structure as Synergism 2 or 3 the Synergism par times and 3 year best times are not really necessary.Neither is the input of the times for the half and the final times as called for in SYN 2. The newly converted files whether raw or adjusted will be read by the Synergism programs if the data file structure is exactly the same. As you have stated the file can be adjusted and governed by the RDSS par times and equalized or they can be the "Raw" data. The choice is up to the individual user. The beauty of RDSS is that it can equalize distances. Please correct me if I am wrong. |
07-18-2012, 10:27 PM | #7 |
Grade 1
Join Date: Jun 2005
Posts: 4,151
|
Parts,
Nice job on race |
07-19-2012, 04:30 PM | #8 |
Grade 1
Join Date: Jun 2005
Location: Nanaimo, British Columbia, Canada
Posts: 8,854
|
Does anyone know - definitively - whether SYN2, and SYN3, expects Call Times in fifths or tenths of seconds?
Ted
__________________
RDSS - Racing Decision Support System™ |
07-19-2012, 07:18 PM | #9 |
Grade 1
Join Date: Jun 2005
Posts: 4,151
|
Ted,
I use fifths but not sure if you can use the others |
07-19-2012, 08:27 PM | #10 |
BetMix User
Join Date: Oct 2005
Posts: 2,433
|
Ted, the time is in fifths.
This is how I manually input the times. |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
RDSS Data Management | alydar_ David | RDSS | 5 | 09-23-2010 06:38 PM |
Release Notes - Version 0.98.8 | Ted Craven | RDSS Info, Reference | 3 | 07-28-2009 08:35 PM |
RDSS Modeller Export | Ted Craven | RDSS | 16 | 07-26-2009 05:30 PM |
Import Old Race Cards | Ted Craven | RDSS | 1 | 05-07-2009 08:25 AM |